
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X155-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X155-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 115 to 155 mm, allowing you to dial back the 155 mm nominal stroke by up to 40 mm during commissioning. The extruded aluminum barrel includes sensor grooves on both sides, and the carbon steel rod has an M16x1.5 thread for secure mounting.
The rear adjuster acts as a mechanical stop to fine-tune the retract end position without swapping cylinders or adding external stops. It is not a locking device and cannot hold a load without live air pressure; for fail-safe load holding, consider the SAIL or BSAI series. This model uses a PT tapered port thread and operates at speeds of 30-800 mm/s. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X155-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 115-155 mm window during machine setup without installing external physical stops.
Quickly adapt the stroke length on a packaging line when processing different product sizes that require varied travel distances.
The 40 mm adjustment range is ideal for product changeovers where exact end-position tuning varies. For a fixed stop without adjustment, use the standard SAI cylinder. To replace this unit, match the 50 mm bore, 155 mm stroke, 40 mm adjuster, PT G1/4 port, and carbon steel rod.
Because the 155 mm stroke is relatively short, side-load stress is minimal, but an external guide is still recommended for heavy lateral loads. If position holding is required without continuous air pressure, the SAIJ adjuster will not suffice; you must integrate an external pilot-operated check valve or select a SAIL pneumatic lock cylinder.
Quick checklist
It features a rear adjusting screw that mechanically limits the piston's retract travel. You can trim the 155 mm nominal stroke back by up to 40 mm, giving an effective adjustable travel window of 115 to 155 mm.
At 0.7 MPa, the push thrust increases to 1374 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.