
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X155-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X155-50 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 105 to 155 mm, allowing you to dial back the end position by up to 50 mm during commissioning.
The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. The standard carbon steel rod and M16x1.5 thread handle typical side loads well, while the rear adjuster acts purely as a mechanical stop for deceleration and does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X155-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end position during product size changes without physically replacing the cylinder or adding shims.
Set a precise travel limit within the 105-155 mm window for applications requiring multiple stroke lengths from a single actuator.
Fine-tune the retract position during initial commissioning to perfectly align parts and absorb mechanical tolerances.
Choose this 50 mm bore when you need more force than the 40 mm version (628 N at 0.5 MPa) but want a smaller footprint than the 63 mm option. The 50 mm adjustment range is ideal for product changeovers on a line, letting you set variable end stops without swapping the cylinder or adding external stops. For load-holding without live pressure, consider the SAIL or BSAI series instead.
When replacing an ISO 15552 cylinder, match the 50 mm bore, 155 mm stroke, 50 mm adjustment, PT tapered port thread, and standard carbon steel rod. Since this SKU lacks the -S magnet suffix, it will not support position sensing without modification. The standard mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 200 kgf.
The rear adjuster screw lets you shorten the effective stroke from the nominal 155 mm down to 105 mm. It acts as a travel stop to fine-tune the end position, but it does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.