
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X155-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X155-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down from the 155mm nominal stroke. This creates a wide 80-155mm usable stroke window, giving you exceptional flexibility to dial in the exact retract end-position during machine commissioning or product changeovers without swapping out the physical cylinder.
This model features a carbon steel piston rod and utilizes PT tapered port threads for its G1/4 connections. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting, while the rear adjuster acts purely as a mechanical stop to set the travel limit—it does not lock or hold the load without continuous live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X155-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract stop from 155mm down to 80mm instantly when switching to a shorter product variant, eliminating the need to physically swap cylinders or add external spacers.
Fine-tune the exact end-of-stroke position during machine commissioning to perfect the gripping or pressing distance, compensating for mechanical tolerance stack-ups.
Adapt the ejection distance on the fly for parts of varying widths without changing the pneumatic layout, using the rear screw to set the precise push-back point.
The massive 75mm adjustment range is ideal for prototypes or production lines running multiple product sizes, allowing you to set variable end-stops on the fly. If you need true load-holding without live air, this adjustable stop is not a brake; you should look at the SAIL or BSAI series instead.
For a direct ISO 15552 replacement, match the 50mm bore, 155mm stroke, 75mm adjustment, G1/4 PT ports, and your required mounting kit (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Because the stroke is 155mm, side-loading is minimal, but always ensure the piston rod thread (M16x1.5) is aligned with your load to prevent premature seal wear.
Quick checklist
It features a rear adjusting screw that mechanically limits the piston's retract travel. With the 75mm adjustment code, you can shorten the effective stroke from the 155mm nominal length down to as little as 80mm, giving you an 80-155mm travel window to set your exact end-position.
If you increase the pressure to 0.7 MPa, the push force rises to 1374N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.