
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X155-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X155-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 155 mm stroke that can be dialed back by up to 75 mm, creating a wide 80-155 mm usable travel window for precise end-position tuning. The extruded aluminum barrel features sensor grooves on both sides, and because this SKU includes the -S magnet option, it directly supports AirTAC CMSE reed and DMSE solid-state switches for exact position feedback.
The defining feature of this SAIJ variant is the external adjusting screw at the rear, which acts as a mechanical stop to fine-tune the retract end without swapping the cylinder or adding external stops. It operates at 30-800 mm/s and uses a standard M16x1.5 rod thread. The adjuster and the integrated variable air cushions only decelerate the travel end; they do not hold the load without live air. For true load-holding without continuous pressure, you would need a related type like SAIL or BSAI.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X155-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 80-155 mm window during commissioning without physically swapping cylinders or adding external mechanical stops.
Quickly adapt the effective stroke on a packaging line when switching between different package sizes, using the rear screw to set new end limits.
Provide adjustable positioning for assembly stations where the end-stop distance must be frequently reconfigured based on the specific component being loaded.
If you need less force, stepping down to the 40 mm bore yields 628 N, while moving up to the 63 mm bore provides 1559 N. The adjustable stroke is specifically chosen over a fixed SAI cylinder when you need commissioning flexibility to trim the 155 mm stroke back to as little as 80 mm. To match this exact ISO 15552 replacement, specify: 50 mm bore, 155 mm stroke, 75 mm adjustment, PT tapered ports, and the -S magnet option.
Because the nominal stroke is 155 mm, side-loading is less of a concern than with longer strokes, but the 20 mm rod diameter still handles moderate lateral forces well. Note that SAIJ uses a reduced mounting subset—Basic, FA, LB, TC, FTC, TCM1, and TCM2—omitting the FB, CA, CB, and CR styles found on some other series.
Quick checklist
At its maximum 1.0 MPa pressure, it can deliver up to 200 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective travel from the 155 mm nominal stroke down to as little as 80 mm, giving you an 80-155 mm usable window. It only sets the end position and does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.