
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X165-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 165mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X165-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel. With a nominal 165 mm stroke and a 100 mm adjustment range, this model provides a usable travel window of 65 to 165 mm.
The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE or DMSE switches, though this specific SKU omits the internal magnet. The carbon steel rod and M16x1.5 thread provide solid durability, while the PT tapered port threads ensure a tight pneumatic seal. The rear adjuster acts purely as a mechanical stop to set the end position and does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X165-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract end position during commissioning or product changeovers, utilizing the 65-165 mm travel window to adapt the line without physically replacing the cylinder.
Act as an adjustable mechanical stop for varying package sizes on a conveyor, allowing operators to dial in the exact 65 to 165 mm extension needed for different formats.
Provide reliable push thrust of 982 N at 0.5 MPa for positioning medium-weight workpieces, using the rear screw to dial in the final resting coordinates accurately.
Selecting this 50 mm bore cylinder makes sense when your application requires a highly flexible end-of-stroke position, as the 100 mm adjustment range allows for significant product size changeovers on a single line without swapping out the actuator. If you need less adjustment flexibility, stepping down to a smaller adjustment code avoids unnecessary mechanical overhang. Because the stroke is 165 mm, an external guide is not strictly required, but always ensure the load is supported to prevent rod side-loading. For load-holding without continuous air pressure, this standard SAIJ adjuster is not a lock—consider an AirTAC SAIL or BSAI cylinder instead. This model is dimensionally interchangeable per ISO 15552, featuring a G1/4 port, PT thread type, and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mountings.
Quick checklist
At an operating pressure of 0.5 MPa, the 50 mm bore provides a push thrust of 982 N and a pull thrust of 825 N. If operated at 0.7 MPa, the push force increases to 1374 N.
The rear adjusting screw acts as a mechanical stop that allows you to shorten the 165 mm nominal stroke by up to 100 mm, creating a usable travel window of 65 to 165 mm. It sets the end position but does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.