verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X165-30

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X165-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 165mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke165 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$96.27 $103.77Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X165-30

The AirTAC SAIJ50X165-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 135-165 mm usable travel window by allowing you to trim up to 30 mm from the 165 mm nominal stroke.

This adjustable-stroke design eliminates the need to swap cylinders or bolt on external stops during commissioning. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic solid-state switches, though this specific SKU is supplied without a magnet. The standard carbon steel rod features an M16x1.5 thread, and the rear adjuster acts strictly as a travel stop, not a lock, meaning it will not hold a load without live air pressure.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X165-30 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X165-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke165 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X165-30

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×165Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X165-30 Is Used

tune

Machine Changeover

Dial in the 135-165 mm travel window during product size changeovers without physically swapping out the cylinder or adding external mechanical stops.

precision_manufacturing

End-Stop Tuning

Fine-tune the retract end-position at commissioning using the rear adjuster screw to perfectly align tooling or verify part placement.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X165-30 the Right Cylinder?

Choose this 50 mm bore cylinder when an application requires precise end-position tuning during machine setup or product changeover. Unlike a fixed-stroke SAI cylinder, the SAIJ rear screw lets you dial in the exact 135-165 mm travel window on the fly. Because the rear adjuster and air cushions only decelerate the load, a plain SAIJ will not hold position without live air—use a SAIL or BSAI cylinder if load-holding is required. This model uses a PT tapered port, accepts standard 30-800 mm/s operating speeds, and mounts via Basic, FA, LB, TC, FTC, TCM1, or TCM2 hardware.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X165-30 FAQ

The rear adjuster screw lets you shorten the effective travel by up to 30 mm, creating a 135-165 mm usable stroke window. It acts as a mechanical stop to fine-tune the end position without changing the cylinder itself.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X165-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X165-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.