
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X165-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 165mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X165-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 165 mm stroke that can be dialed back by up to 75 mm, giving operators a 90-165 mm usable travel window for precise end-position tuning at commissioning.
This extruded aluminum barrel integrates sensor grooves on both sides for flexible mounting. The standard carbon steel rod features an M16x1.5 thread, and the pneumatic supply connects via PT tapered G1/4 ports. Variable air cushions at both ends manage deceleration, while the rear mechanical stopper handles the final position trimming without requiring an external stop block.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X165-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Rapidly dial in new end-stops for different part lengths on a single machine without physically replacing the actuator.
Adjust the travel window from 90 to 165 mm on the fly to handle varying package sizes on a sorting line.
Fine-tune the exact retract position during machine setup to perfectly align tooling without adding external stopper blocks.
The 75 mm adjustment range is exceptionally wide, making this specific SKU ideal for product changeovers on a conveyor line where multiple end-stop positions are required without swapping the cylinder. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure; for true load-holding, select a SAIL or BSAI cylinder.
As a dimensionally interchangeable ISO 15552 cylinder, it replaces fixed-stroke units using the same footprint. Ensure your setup specifies a 50 mm bore, 165 mm stroke, up to 75 mm adjustment, PT G1/4 ports, and the standard carbon steel rod. Because the stroke is 165 mm, side loads are moderate, but you should still ensure proper external guiding for optimal seal life.
Quick checklist
It features a rear adjusting screw that allows you to shorten the effective stroke by up to 75 mm. This creates a usable travel window of 90 to 165 mm, letting you set the exact end position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.