verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X170-100

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X170-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 170mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke170 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$96.27 $103.77Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X170-100

The AirTAC SAIJ50X170-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 170 mm stroke that can be dialed back by up to 100 mm, yielding a highly flexible 70-170 mm usable travel window.

The integrated adjusting screw acts as a hard stop to fine-tune the retract end position during commissioning, though it does not lock the load without live air. This extruded aluminum barrel includes sensor grooves on both sides for CMSE or DMSE switches, and uses a PT tapered port thread. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X170-100 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X170-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke170 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X170-100

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×170Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X170-100 Is Used

tune

Machine Changeover

Dial in the 70-170 mm travel window on the fly to accommodate different product sizes without physically swapping the actuator.

settings_input_component

End-Position Tuning

Use the rear stopper screw to precisely set the retract end position during initial commissioning, avoiding the need for external shims.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X170-100 the Right Cylinder?

Choose this 50 mm bore when an application requires a variable end-stop within a 70-170 mm travel range, such as product-size changeovers on a packaging line. For fixed travel without the need for commissioning tweaks, a standard SAI cylinder is simpler.

Because the stroke here is 170 mm, the 20 mm carbon steel rod and M16x1.5 thread handle moderate side loads, but an external guide is recommended for any unsupported loads. To hold a load securely without continuous air pressure, you must use an external rod lock or pilot-operated check valve, or switch to an AirTAC SAIL or BSAI cylinder. For an exact ISO 15552 replacement match, verify the 170 mm stroke, 100 mm adjustment, PT port, and mounting style.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X170-100 FAQ

At the maximum 1.0 MPa pressure, it can deliver up to 200 kgf.

The rear adjuster screw allows you to shorten the effective stroke by up to 100 mm from the 170 mm nominal length, creating a 70-170 mm travel window. It functions as a mechanical stop and does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X170-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X170-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.