
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X170-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 170mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X170-40 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 170 mm stroke that can be fine-tuned down by up to 40 mm, yielding a usable travel window of 130 to 170 mm. This adjustment capability allows precise end-position tuning at commissioning without swapping the cylinder or adding external stops.
The barrel is machined as an extruded aluminum profile with sensor grooves on both sides, ready for CMSE or DMSE switches if a magnet is specified later. This model features a carbon steel piston rod with an M16x1.5 thread, paired with PT tapered port threads (G1/4). The rear adjuster acts purely as a mechanical stop to set the retract deceleration point; it does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X170-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 130-170 mm travel window during packaging line format changes to accommodate different carton depths without changing hardware.
Fine-tune the retract position during machine commissioning to achieve exact alignment, using the rear stopper rather than adding external shims.
Adjust the effective stroke on automated assembly stations to trigger operations at precise intermediate distances within the 40 mm range.
The SAIJ50X170-40 is ideal for machine setups requiring frequent product-size changeovers, replacing fixed-stroke SAI cylinders when exact end positions must be dialed in on the fly.
When ordering for an ISO 15552 replacement, confirm the 50 mm bore, 170 mm stroke, 40 mm adjustment range, PT port threads, and the required mounting style. SAIJ supports a specific mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options. Because the stroke is 170 mm, side loads are manageable, but ensure the M16x1.5 rod is adequately supported by external guides if absorbing lateral forces. For load-holding without continuous air pressure, select a SAIL or BSAI variant instead of relying on the adjuster.
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjuster acts as a mechanical stop that trims the effective travel. For this 170 mm nominal stroke cylinder, you can shorten the stroke by up to 40 mm, creating a usable travel window of 130 to 170 mm. It sets the end position but does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.