verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X175-75

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X175-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 175mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke175 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$96.27 $103.77Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X175-75

The AirTAC SAIJ50X175-75 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to trim the effective travel down from a 175 mm nominal stroke to any point within a 100-175 mm usable window.

This model features a carbon steel piston rod and PT tapered port threads. The rear adjustment screw acts purely as a mechanical stop to fine-tune the retract end position during commissioning; it does not lock or hold the load without continuous air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X175-75 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X175-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke175 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X175-75

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×175Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X175-75 Is Used

tune

Product Changeover

Dial in the 100-175 mm travel window instantly on packaging lines when switching between different box sizes, eliminating the need for physical spacer changes.

precision_manufacturing

Commissioning Calibration

Fine-tune the exact retract end-position during machine setup to achieve precise mechanical alignment without disassembling the cylinder.

factory

Variable End-Stop Positioning

Provide a customizable mechanical stop for assembly stations where the required retraction distance frequently changes based on the specific fixture in use.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X175-75 the Right Cylinder?

The 75 mm adjustment range is particularly useful on machines that process varying product sizes, allowing you to reposition the end-stop rapidly without swapping cylinders or adding external stops. If you need to hold a load vertically without live air, this standard SAIJ adjuster is not a lock—you would need an external pilot-operated check valve or a SAIL lock cylinder.

When replacing an ISO 15552 cylinder, match the 50 mm bore, 175 mm stroke, 75 mm adjustment, G1/4 port, and PT thread type. Because the total stroke is under 300 mm, side-load stress is manageable, but ensure your mounting choice from the available Basic, FA, LB, TC, FTC, TCM1, or TCM2 kits adequately supports the rod.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X175-75 FAQ

At 0.7 MPa, the push force increases to 1374 N.

The rear adjuster screw allows you to shorten the 175 mm nominal stroke by up to 75 mm, creating a usable travel window of 100-175 mm. The screw functions as a mechanical stop to set the end position and is not a locking mechanism.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X175-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X175-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.