verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X185-75

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X185-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 185mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke185 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$99.07 $106.57Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X185-75

The AirTAC SAIJ50X185-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. The generous 75mm adjustment range creates a highly flexible 110-185mm usable travel window, enabling precise end-position tuning during commissioning without swapping out the physical cylinder.

This extruded aluminum barrel incorporates sensor grooves on both sides for CMSE reed or DMSE electronic switches, though this non-magnetized version requires the -S option to utilize them. The rear adjuster functions purely as a travel stop to set deceleration and end limits; it does not hold the load without live air pressure. For true load-holding without continuous air, consider the SAIL or BSAI series instead.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X185-75 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X185-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke185 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X185-75

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×185Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X185-75 Is Used

tune

Product Changeovers

Quickly dial in new end-stops for varying package sizes on a packaging line without changing the cylinder.

settings_input_component

Commissioning Calibration

Fine-tune the 110-185mm travel window during machine setup to perfectly time the sequence of operations.

factory

Adjustable End-Stop

Use the rear screw to set precise retract positions for assembly presses requiring strict depth control.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X185-75 the Right Cylinder?

The 75mm adjustment range is ideal for production lines running multiple product sizes, allowing you to dial in the exact 110-185mm travel window on the fly rather than maintaining an inventory of fixed-stroke SAI cylinders.

When replacing an ISO 15552 cylinder, match the 50mm bore, 185mm nominal stroke, 75mm adjustment, PT G1/4 port, and your required mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the 185mm stroke is relatively short, side-loading is less severe than on longer strokes, but you should still ensure the load is properly guided to protect the M16x1.5 rod thread from deflection.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X185-75 FAQ

At the maximum 1.0 MPa pressure, it can deliver up to 200 kgf.

The nominal stroke is 185mm, but the rear adjuster allows you to trim the stroke by up to 75mm. This results in a usable adjustable travel window of 110mm to 185mm, depending on your setup.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X185-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X185-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.