verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X190-100

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X190-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 190mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke190 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$99.07 $106.57Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X190-100

The AirTAC SAIJ50X190-100 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This wide tuning band allows operators to dial in the exact retract end-position during commissioning without swapping out the physical cylinder.

Built with a carbon steel piston rod and a standard PT tapered port thread, this 50mm bore unit operates at speeds of 30-800mm/s. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches, though a magnet is not included in this base configuration. It utilizes a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X190-100 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X190-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke190 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X190-100

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×190Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X190-100 Is Used

tune

Product Changeover

Quickly modify the retract distance by up to 100mm to accommodate different product lengths on the same packaging line without changing hardware.

precision_manufacturing

End-Position Tuning

Fine-tune the exact stopping point during machine commissioning to perfect alignment and avoid mechanical crashes.

conveyor_belt

Variable Diverter Stops

Adjust the stroke window on the fly for conveyor routing applications where package sizes frequently vary.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X190-100 the Right Cylinder?

If you need less force, the 40mm bore provides 628N; if your load is heavier, stepping up to the 63mm bore yields 1559N. The 100mm adjustment window is perfect for machines that undergo frequent product-size changeovers, eliminating the need to physically swap cylinders or bolt on external stops.

When specifying a replacement, ensure you match the 50mm bore, 190mm nominal stroke, PT port thread, and the desired mounting style. Because the nominal stroke is 190mm, an external guide should be considered to prevent excessive side-loading on the rod. Remember that the rear adjuster functions strictly as a travel stop and does not hold the load without live air; for positive load-holding without pressure, consider an AirTAC SAIL or BSAI cylinder.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X190-100 FAQ

If operated at 0.7 MPa, the push force increases to 1374N.

The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke from its 190mm nominal length down to as little as 90mm, providing a wide 90-190mm usable travel window for exact end-position tuning.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X190-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X190-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.