
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X190-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 190mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X190-40 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 190 mm stroke that can be fine-tuned backward by up to 40 mm, yielding a usable travel window of 150 to 190 mm.
This extruded aluminum profile cylinder features a standard carbon steel piston rod with an M16x1.5 thread and PT tapered ports. The rear adjustment screw acts purely as a mechanical stop to set the retract position during commissioning; it does not lock or hold the load without continuous live air pressure. For load-holding requirements, an external rod lock or a related SAIL pneumatic lock cylinder is required.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X190-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 150-190 mm travel window during format size changes without physically swapping the cylinder or repositioning hard stops.
Fine-tune the retract endpoint at machine commissioning to achieve exact seating against workpieces, preventing mechanical crashes.
Select this 50 mm bore when an application demands precise retract positioning without adding external stopper blocks. If your setup requires less force, stepping down to a 40 mm bore yields 628 N at 0.5 MPa, while moving up to a 63 mm bore provides 1559 N. Because the 190 mm stroke is under the 300 mm threshold, side-load stress is moderate, though external guiding is still recommended for heavy off-center loads.
Choose the adjustable SAIJ over a fixed-stroke SAI when accommodating product size changeovers on a line. To match this ISO 15552 dimensionally interchangeable cylinder, specify the 50 mm bore, 190 mm stroke, 40 mm adjustment, PT port thread, carbon steel rod, and no magnet. The available mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
If operated at 0.7 MPa, the push force increases to 1374 N.
The rear adjuster acts as a mechanical stop that allows you to shorten the effective stroke from its 190 mm nominal length down to 150 mm. It sets the travel end but does not function as a lock to hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.