
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X190-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 190mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X190-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 75mm. This yields a wide usable window of 115-190mm, letting you dial in the exact end position during commissioning without swapping out the unit or bolting on external stops. It features a carbon steel piston rod and PT tapered port threads.
The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches, though this specific SKU is configured without a magnet. The rear adjuster acts purely as a travel stop for end-position tuning and does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X190-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 115-190mm travel window during product size changeovers to set new retract stops without physically replacing the cylinder.
Fine-tune the final retract position during machine commissioning to align tooling perfectly, avoiding the need for external mechanical stoppers.
Unlike a fixed-stroke SAI cylinder, the SAIJ rear screw allows rapid fine-tuning of the retract position at the machine.
For an exact ISO 15552 replacement match, verify your 50mm bore, 190mm nominal stroke, 75mm adjustment range, PT port threads, and required mounting accessory. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Because the rear adjuster and air cushions only decelerate the travel end, do not rely on them to hold a load; use a SAIL pneumatic lock or external rod lock for fail-safe load holding without live air.
Quick checklist
It features a rear adjusting screw that acts as a mechanical stopper, allowing you to shorten the nominal 190mm stroke by up to 75mm. This creates an adjustable travel window of 115-190mm so you can fine-tune the end position at commissioning without changing the cylinder.
At the maximum 1.0MPa pressure, it can deliver up to 200kgf of push force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.