verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X20-10

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X20-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 20mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke20 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$80.46 $87.96Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X20-10

The AirTAC SAIJ50X20-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 10-20mm usable travel window, allowing you to dial back the 20mm nominal stroke by up to 10mm during commissioning.

This model uses a standard carbon steel rod and PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. The rear adjuster acts purely as a travel stop for end-position tuning, not a load-holding lock, so live air pressure is required to maintain position.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X20-10 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X20-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke20 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X20-10

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×20Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X20-10 Is Used

tune

Machine Setup Commissioning

Dial in the exact 10-20mm end-stop position during initial machine build without physically swapping cylinders or adding external stopper blocks.

settings_input_component

Product Size Changeover

Quickly adjust the retract stroke by up to 10mm on packaging lines when switching between slightly different product lengths.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X20-10 the Right Cylinder?

Choose this 50mm bore adjustable-stroke cylinder when your application requires fine end-position tuning at commissioning or during product changeover without swapping out the entire unit or adding external stops. Conversely, moving up to a 63mm bore provides 1559N.

To replace this unit with an ISO 15552 interchangeable cylinder, match the 50mm bore, 20mm stroke, 10mm adjustment, PT port, and standard carbon steel rod. Because it lacks a -S magnet option, it will not work with CMSE reed or DMSE electronic sensors. Remember that the rear adjuster and air cushions only decelerate the travel end; for true load-holding without live air, consider the SAIL or BSAI series instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X20-10 FAQ

At the maximum 1.0 MPa pressure, it delivers up to 200 kgf.

The rear adjuster screw acts as a mechanical stop that lets you shorten the effective travel from the 20mm nominal stroke down to a minimum of 10mm, creating a 10-20mm usable window. It only sets the travel end and does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X20-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X20-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.