
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X200-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 200mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X200-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 190-200 mm usable travel window, allowing you to dial back the 200 mm nominal stroke by up to 10 mm during commissioning. Delivering 982 N of pull force at 0.5 MPa, it handles mid-range automation tasks with precision.
This model uses a 20 mm carbon steel rod with an M16x1.5 thread, paired with 30 mm air cushions at both ends to manage end-of-stroke deceleration. The extruded aluminum barrel includes sensor grooves on both sides, ready for AirTAC CMSE reed and DMSE electronic switches if a magnet is specified later. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X200-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 190-200 mm retract position during product size transitions without swapping the cylinder or adding external stop blocks.
Use the 10 mm rear adjustment screw to fine-tune the end-of-stroke position precisely during initial machine commissioning.
Achieve exact end-stop control for 982 N pull force applications, adapting the stroke window on the fly for varying part dimensions.
Choose this 50 mm bore when your application requires the 982 N pull force at 0.5 MPa, stepping up from a 40 mm bore that provides 528 N. The 10 mm rear adjuster acts as a mechanical stop to fine-tune the retract position without adding external stops or swapping to a fixed-stroke SAI cylinder. For product changeovers, this built-in adjustment allows quick end-position tuning.
Remember that the rear adjuster and air cushions only manage travel ends; they do not hold the load without live air pressure. For position holding without continuous pressure, consider an external rod lock, a pilot-operated check valve, or related AirTAC types like the SAIL or BSAI. This unit features PT tapered ports and a standard carbon steel rod.
Quick checklist
The operating speed range for this 50 mm bore cylinder is 30-800 mm/s.
The rear adjuster screw lets you shorten the 200 mm nominal stroke by up to 10 mm, creating a 190-200 mm usable travel window. It acts as a mechanical stop for end-position tuning and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.