verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X200-20

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X200-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 200mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke200 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$99.07 $106.57Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X200-20

The AirTAC SAIJ50X200-20 is a double-acting ISO 15552 profile cylinder with a 50mm bore and 200mm nominal stroke. It features a rear adjusting stopper that allows you to fine-tune the effective travel down to a 180-200 mm window without adding external stops.

The extruded aluminum barrel includes sensor grooves on both sides for standard switches. It uses a G1/4 port and a 16mm carbon steel rod with an M16x1.5 thread. The rear adjuster acts purely as a travel stop to set the end position, so it will not hold the load without live air pressure.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X200-20 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X200-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke200 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X200-20

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X200-20 Is Used

tune

Machine Changeover

Dial in the 180-200 mm end-stop during product size transitions on a packaging line without swapping out the entire cylinder.

precision_manufacturing

Assembly Calibration

Fine-tune the retraction end position to perfectly seat components, absorbing minor fixture tolerances at commissioning.

factory

Conveyor Diverter

Adjust the stroke length on the fly to meet varying package dimensions while maintaining 982 N of actuation force at 0.5 MPa.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X200-20 the Right Cylinder?

If your process demands less force, stepping down to a 40mm bore yields 628 N. The adjustable 180-200 mm travel window makes this variant superior to a fixed-stroke SAI cylinder when accommodating slight mechanical variations or product changeovers.

As a dimensionally interchangeable ISO 15552 cylinder, it matches standard 50mm bore, 200mm stroke, PT port, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting interfaces. Because it lacks a magnet, it will not work with CMSE or DMSE sensors without a custom configuration. For load-holding without continuous air, consider the SAIL or BSAI series instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X200-20 FAQ

The rear stopper screw lets you mechanically trim the effective travel back by up to 20 mm. This creates a 180-200 mm usable stroke window, allowing precise end-position tuning at commissioning without replacing the cylinder.

At 0.7 MPa, the push force increases to 1374 N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X200-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X200-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.