
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X200-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 200mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X200-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 125-200 mm usable travel window, letting you dial back the nominal 200 mm stroke by up to 75 mm during machine setup.
The standard carbon steel piston rod features an M16x1.5 thread, offering robust resistance to bending under moderate side loads. For position sensing, the extruded aluminum barrel includes sensor grooves on both sides, ready to accept AirTAC CMSE reed or DMSE electronic solid-state switches if a magnet is added later.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X200-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 125 to 200 mm retract position during line commissioning or when switching product sizes, avoiding the need to bolt on external stops.
Provides precise mechanical tuning for the retract stroke on packaging or dosing machinery where the exact end-of-travel point must be tweaked on the fly.
Allows operators to fine-tune the pusher stroke distance on conveyor sorting gates to accommodate varying package dimensions.
If you need less force, the 40 mm bore provides 628 N; for heavier payloads, the 63 mm bore yields 1559 N. Choose this adjustable SAIJ over a fixed SAI when you need to fine-tune the retract position at commissioning or during product changeover without swapping out the entire cylinder.
The rear adjuster acts purely as a mechanical travel stop and does not lock the load without live air pressure. For true load-holding without continuous air, consider the SAIL or BSAI series. This model uses PT tapered ports (G1/4) and supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
A rear external screw stopper lets you shorten the effective stroke by up to 75 mm from the 200 mm nominal length, creating a usable travel window of 125-200 mm. It sets the retract end position but does not hold the load without live air pressure.
At 0.9 MPa, the push force increases to 1767 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.