
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X210-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 210mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X210-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster that allows you to trim the nominal 210 mm travel back by up to 100 mm. This creates a highly flexible 110 to 210 mm usable window, letting you dial in the exact end position during commissioning without swapping out the actuator.
Built with a carbon steel piston rod and a standard PT tapered port thread, this unit utilizes a variable air cushion at both ends to manage deceleration. The extruded aluminum barrel includes sensor grooves on both sides for straightforward position feedback. Keep in mind the rear stopper only sets the travel end-point; it does not function as a locking device, so live air pressure is required to hold a load in place.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X210-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Rapidly adapt the retract distance from 210 mm down to 110 mm when switching machinery to handle different package dimensions on the fly.
Dial in the exact end-position during machine setup without fabricating custom spacer blocks or changing the entire actuator assembly.
Provide adjustable physical stops for assembly presses that need to test multiple stroke depths within a single 110 to 210 mm travel window.
The 100 mm adjustment range is particularly valuable on lines processing varying product sizes, as operators can modify the retract distance on the fly instead of installing external physical stops. For holding loads without continuous air pressure, consider the SAIL or BSAI series instead, as the SAIJ adjuster is strictly a travel limiter.
Since the stroke is 210 mm, which exceeds 300 mm? No, but even at 210 mm, ensuring proper guidance is good practice to prevent rod side-loading. To match this exact configuration for an ISO 15552 interchange, specify the 50 mm bore, 210 mm stroke, 100 mm adjustment, PT port, and your required mounting interface from the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
At the maximum rated pressure of 1.0 MPa, it can deliver up to 200 kgf.
The rear adjuster acts as a mechanical stop that shortens the effective travel from the nominal 210 mm. You can trim the stroke by up to 100 mm, providing an adjustable operating window between 110 mm and 210 mm to fine-tune the end position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.