
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X210-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 210mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X210-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 170-210 mm usable travel window, letting you dial back the nominal 210 mm stroke by up to 40 mm during commissioning.
The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches if needed later. Remember that the rear adjuster is a travel stop, not a lock; it sets the end position but will not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X210-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the 170-210 mm travel window during line changeovers to accommodate different product sizes without replacing the cylinder.
Dial in the exact retract end-position during machine setup, using the rear stopper to absorb minor mechanical tolerances without external shims.
Set variable retract positions on automated assembly lines, relying on the 40 mm adjustment range to alter the effective stroke on the fly.
The 40 mm adjustment range is ideal for product changeovers, allowing you to fine-tune the retract end position without swapping the cylinder or adding external stops.
This configuration uses a standard carbon steel rod and PT tapered ports. Because the 210 mm stroke is relatively long, ensure your setup includes an external guide to support the 20 mm rod and prevent excessive side-loading. For load-holding without live pressure, select a SAIL or BSAI cylinder instead.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 200 kgf of push force.
The rear adjuster screw acts as a mechanical stop that shortens the effective stroke from its nominal 210 mm down to as little as 170 mm. This allows you to tune the end position during commissioning, but it is a stop, not a lock, and will not hold the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.