
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X210-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 210mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X210-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. The rear adjuster provides a 40mm trim range, creating a usable travel window between 170 and 210mm for precise commissioning.
This adjustable stop lets you fine-tune the retract end position during machine setup or product changeover without swapping the cylinder or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides, directly supporting AirTAC CMSE reed and DMSE electronic solid-state switches. Remember that this rear adjuster acts only as a travel stop, not a lock, so it cannot hold a load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X210-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 170-210mm window during machine commissioning to perfectly seat parts without machining external spacers.
Quickly adapt the cylinder stroke on packaging lines when switching to a different carton size, using the 40mm rear screw to accommodate new package dimensions.
Secure workpieces of varying lengths in a fixture by adjusting the travel end-point, ensuring consistent clamping force without repositioning the entire cylinder.
Choose this 50mm bore when you need more thrust than the 40mm bore provides (628N at 0.5 MPa) but want to avoid the larger footprint of the 63mm cylinder (1559N at 0.5 MPa). The 40mm adjustment range is ideal for production lines running mixed product sizes, allowing you to dial in the exact 170-210mm travel window on the fly. For any load-holding requirements without continuous air pressure, select a SAIL or BSAI cylinder instead, as the SAIJ adjuster is strictly a stop.
To match this ISO 15552 interchangeable cylinder, specify a 50mm bore, 210mm nominal stroke, PT tapered port thread, carbon steel rod, and the -S magnet option. With a 210mm stroke, the 20mm rod and M16x1.5 thread handle moderate side loads, but an external guide is recommended for heavy lateral forces. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you shorten the 210mm nominal stroke by up to 40mm. This creates a usable travel window of 170 to 210mm, allowing precise end-position tuning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.