
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X210-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 210mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
By turning the external stopper screw at the rear, you can shorten the effective travel from its 210 mm nominal length down to as little as 135 mm. This creates a wide 75 mm adjustment window, allowing you to fine-tune the retract end-position at commissioning without swapping out the physical cylinder.
This 50 mm bore profile cylinder features a carbon steel piston rod and uses PT tapered G1/4 port threads. It includes variable air cushions at both ends to manage deceleration, while the standard extruded aluminum barrel provides dual sensor grooves. Should your application require position feedback later, you can mount reed CMSE or solid-state DMSE sensors directly into these channels.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X210-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 135-210 mm window during product size transitions, eliminating the need to physically swap cylinders for different part lengths.
Fine-tune the final end-position at machine commissioning to achieve perfect alignment, using the rear screw to compensate for mechanical tolerances without adding external stopper blocks.
Set variable material feed lengths on automated lines by adjusting the stroke back up to 75 mm, providing flexible manufacturing control for varying batch dimensions.
The substantial 75 mm adjustment range is highly beneficial for product-size changeovers on a packaging line, letting operators set a new end-stop without adding external physical stops. Unlike a fixed-stroke SAI cylinder, this SAIJ model provides built-in mechanical flexibility for varying travel distances.
When ordering, confirm the ISO 15552 replacement match by specifying a 50 mm bore, 210 mm stroke, 75 mm adjustment, PT port thread, and your required mounting bracket from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the 210 mm stroke exceeds 300 mm is false here, standard side-load guidance is less critical, but an external guide is still recommended for heavy lateral loads. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding without pressure, consider an AirTAC SAIL or BSAI cylinder.
Quick checklist
If you increase the pressure to 0.7 MPa, the push force rises to 1374N.
The rear of the cylinder features an external stopper screw that mechanically limits the piston's retract travel. You can adjust the usable stroke anywhere between 135 mm and 210 mm, allowing you to set the exact end-position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.