
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X220-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 220mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X220-20 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 220 mm stroke that can be fine-tuned down by up to 20 mm, creating a precise 200-220 mm usable travel window for commissioning flexibility.
This extruded aluminum profile cylinder includes sensor grooves on both sides for flexible switch placement. It uses PT tapered port threads (G1/4) and a 20 mm carbon steel rod with an M16x1.5 thread, offering robust resistance to side loading. The rear adjuster acts strictly as a travel stop to set deceleration limits, not as a lock to hold loads without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X220-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 200-220 mm travel window during product size changes to set new end positions rapidly without changing the cylinder.
Fine-tune the retract end position at commissioning using the rear screw, ensuring precise mechanical alignment without external stoppers.
Adjust the effective stroke on packaging lines to accommodate varying package lengths on the fly.
Select this 50 mm bore when an application requires precise end-position tuning during machine setup or product changeovers, avoiding the need to swap cylinders or bolt on external stops. Because the 220 mm stroke exceeds 300 mm is not the case here, but for long unsupported travels, always use an external guide to prevent rod binding.
When replacing an ISO 15552 cylinder, match the 50 mm bore, 220 mm stroke, 20 mm adjustment, PT port thread, and carbon steel rod. Choose from Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting options. Note that SAIJ omits FB, CA, CB, and CR mounts. If position holding without live air is required, select an external rod lock or pilot-operated check valve, as the SAIJ adjuster is a stop, not a brake.
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 20 mm, providing a usable travel window of 200 to 220 mm. It acts as a mechanical stop to tune the end position and is not a lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.