verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X220-30

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X220-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 220mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke220 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$101.86 $109.36Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X220-30

The AirTAC SAIJ50X220-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 220 mm stroke that can be dialed back by up to 30 mm, creating a precise 190-220 mm usable travel window for fine-tuning end positions during commissioning.

This extruded aluminum profile cylinder features a G1/4 port, a 20 mm carbon steel rod with an M16x1.5 thread, and variable air cushions at both ends. The rear adjustment screw functions strictly as a mechanical stop to set the retract position and does not hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI series instead.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X220-30 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X220-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke220 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X220-30

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×220Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X220-30 Is Used

tune

End-Position Calibration

Dial in the exact 190-220 mm retract distance during machine setup to perfect material feeding without adding physical spacers.

settings_input_component

Product Changeover

Quickly adjust the stroke window on packaging lines when switching to different product sizes, minimizing downtime between runs.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X220-30 the Right Cylinder?

Choose this 50 mm bore adjustable-stroke cylinder when your application requires exact end-position tuning or frequent product changeovers, eliminating the need to swap out a fixed-stroke SAI cylinder or bolt on external stops.

Because this model features a 220 mm stroke, the 20 mm rod and M16x1.5 thread provide robust support, but any unsupported load over 300 mm still requires an external guide to prevent side-loading damage. To match this ISO 15552 interchangeable cylinder exactly, specify the 50 mm bore, 220 mm stroke, 30 mm adjustment, PT tapered port threads, and your desired mounting set. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, explicitly omitting FB, CA, CB, and CR options.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X220-30 FAQ

At its maximum pressure of 1.0 MPa, the push force increases to 1963 N.

The rear adjuster acts as a mechanical stop that shortens the 220 mm nominal stroke by up to 30 mm, providing a usable travel window of 190-220 mm. It only sets the end position and does not lock the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X220-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X220-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.