
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X220-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 220mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X220-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 180-220 mm usable travel window, letting you dial back the 220 mm nominal stroke by up to 40 mm during commissioning.
This extruded aluminum profile barrel includes sensor grooves on both sides for flexible mounting. The 16 mm carbon steel rod and M12x1.25 thread offer solid side-load resistance, while the PT tapered port matches standard pneumatic plumbing. The rear stopper sets the end position but does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X220-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 180-220 mm travel window during product size transitions without physically replacing the actuator.
Dial in the exact retract position at commissioning to align tooling, using the 40 mm adjustment range to absorb mechanical tolerances.
Set a specific intermediate stroke length on the line for flexible part handling, relying on the rear screw rather than external stops.
Choose this 50 mm bore when 40 mm falls short but 63 mm is excessive. A standard SAI delivers fixed travel, whereas this SAIJ model allows precise end-position tuning without swapping cylinders or adding external stops. The rear adjuster acts purely as a travel stop, not a lock. For load-holding without live pressure, use a SAIL or BSAI variant. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since the 220 mm stroke is substantial, always use an external guide to prevent rod side-loading.
Quick checklist
At 0.7 MPa the push force increases to 1374 N.
The rear adjuster lets you shorten the 220 mm nominal stroke by up to 40 mm, creating a 180-220 mm usable travel window for fine-tuning end positions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.