
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X220-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 220mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X220-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 75 mm. This creates a highly flexible usable-travel window of 145-220 mm, letting you dial in exact end positions at commissioning without swapping out the unit.
Unlike fixed-stroke actuators, this model uses an external rear stopper screw to fine-tune the retract position on the fly, which is ideal for accommodating product changeovers on a line. The extruded aluminum barrel includes sensor grooves on both sides for mounting switches, though this specific SKU is configured without a magnet. Remember that the rear adjuster functions purely as a travel stop and does not hold the load without live air pressure; for true load-holding, consider the SAIL or BSAI series.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X220-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 145-220 mm travel window during machine setup to instantly adapt the line for different product lengths without changing cylinders.
Perfect for sorting or diverting items of varying sizes on a belt, using the rear screw to fine-tune the exact retract distance on the fly.
Achieve precise end-position tuning during initial machine build, trimming up to 75 mm of stroke to align tooling perfectly without adding external stops.
The 75 mm adjustment range is particularly valuable when you need a wide variable end-stop to accommodate multiple product sizes on the same conveyor line.
When replacing an ISO 15552 cylinder, match the 50 mm bore, 220 mm stroke, PT port thread, and the required mounting accessory from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the total stroke is 220 mm, you should use an external guide to prevent excessive side-loading on the 16 mm rod, as the adjuster and air cushions only decelerate the travel end and do not act as a brake.
Quick checklist
It features a rear stopper screw that allows you to shorten the nominal 220 mm stroke by up to 75 mm, providing an adjustable travel window of 145 to 220 mm. This lets you fine-tune the end position at commissioning without adding external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.