
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X225-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 225mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X225-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 185 to 225 mm. The integrated -S magnet enables precise position detection with CMSE reed or DMSE electronic solid-state sensors.
Instead of relying on fixed stops, the external rear screw allows you to fine-tune the retract end position directly during commissioning. This extruded aluminum cylinder includes adjustable air cushions at both ends to manage kinetic energy, but note that the adjuster acts only as a travel stop, not a load-holding lock.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X225-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 185-225 mm stroke window during format size changes on packaging lines without physically replacing the actuator.
Fine-tune the retract position at machine commissioning to achieve exact mechanical alignment without adding external shims.
Adjust the travel distance of a sorting arm on the fly to accommodate different package lengths moving down the line.
The adjustable 40 mm window is perfect for product changeovers, allowing you to shift the end-stop without swapping the cylinder. Because the nominal stroke is 225 mm, ensure adequate external guiding to prevent excessive side-loading on the rod.
For a direct ISO 15552 interchangeable replacement, match the 50 mm bore, 225 mm stroke, 40 mm adjustment code, PT port thread, and the -S magnet requirement. If the machine demands true load-holding without live air pressure, a plain SAIJ will not suffice; consider an AirTAC SAIL pneumatic lock cylinder, a BSAI clamp-lock, or an external pilot-operated check valve instead.
Quick checklist
At the maximum operating pressure of 1.0 MPa, the push force reaches 1767 N.
The rear adjuster screw allows you to shorten the effective travel from the nominal 225 mm down to 185 mm. This creates a 40 mm tuning window for setting exact end positions without changing the cylinder's physical mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.