
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X230-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 230mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X230-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window from 180 to 230 mm. The barrel is extruded aluminum with sensor grooves machined on both sides.
This model uses a 16 mm carbon steel rod with an M12x1.25 thread and G1/4 ports. The rear adjuster acts purely as a travel stop for setting the exact end position during commissioning; it is not a locking device and will not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X230-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop during product size changeovers without swapping out the entire cylinder assembly.
Fine-tune the retract travel window between 180 and 230 mm to perfect the seating position of a workpiece.
Set variable mechanical stops along a conveyor line to accommodate different package lengths on the fly.
The 50 mm adjustment range is ideal for product changeovers where the end-of-stroke position frequently varies by up to 50 mm, eliminating the need to physically swap cylinders or bolt on external stops. When matching an ISO 15552 replacement, verify the 230 mm stroke, 50 mm adjustment, PT tapered ports, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the stroke is 230 mm, ensure an external guide is used to prevent excessive side loading on the 16 mm rod.
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjuster screw lets you shorten the nominal 230 mm stroke by up to 50 mm, creating a usable travel window of 180 to 230 mm. This stopper only sets the end position and requires live air to hold the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.