
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X240-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 240mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X240-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 230 to 240 mm, allowing you to dial back the nominal 240 mm stroke by up to 10 mm during commissioning.
This model features a carbon steel rod and PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. The rear adjuster acts purely as a mechanical stop for end-position tuning; it does not lock the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X240-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 230 to 240 mm end position during initial commissioning without machining external stopper blocks.
Quickly adjust the stroke by up to 10 mm on a packaging line when switching to a slightly shorter product format.
Fine-tune the retract stop to compensate for mechanical wear or sensor drift over the machine lifecycle.
An adjustable stroke is ideal for product changeovers, letting you shift the end-stop without swapping cylinders or adding external stops. For strokes of 240 mm, ensure external guides support the load to prevent side-loading on the rod.
To match this ISO 15552 cylinder, specify a 50 mm bore, 240 mm stroke, 10 mm adjustment, PT G1/4 ports, and mounting from the SAIJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the rear screw and air cushions decelerate the load but do not hold it; for true load-holding without live air, consider the SAIL or BSAI series.
Quick checklist
At 0.7 MPa the push force increases to 1374 N.
The rear adjuster screw lets you mechanically shorten the 240 mm stroke by up to 10 mm, creating a 230 to 240 mm travel window. It acts as a hard stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.