
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X25-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 25mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X25-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 15-25 mm, allowing you to dial back the 25 mm nominal stroke by up to 10 mm during commissioning.
The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches. Unlike a fixed-stroke SAI, this rear screw stopper lets you fine-tune the retract end position without swapping the cylinder or adding external stops.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X25-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end position for short clamping or pressing tasks, trimming up to 10mm off the 25mm stroke to perfect the motion.
Adjust the retract stop during initial commissioning to avoid adding external physical stops to the machine frame.
Quickly adapt the cylinder's effective travel window when switching between product sizes on a shared manufacturing line.
Choose this 50mm bore when a 40mm bore (628N at 0.5 MPa) lacks sufficient thrust, but a 63mm bore (1559N) is excessive. The 10mm adjustment range is ideal for short-stroke setups requiring precise end-position tuning. To match this ISO 15552 replacement, specify the 50mm bore, 25mm stroke, PT tapered ports, and no magnet.
With a short 25mm stroke, side-load risks are minimal, but the adjuster acts only as a travel stop. It does not hold the load without live air; for true load-holding, select an SAIL or BSAI cylinder.
Quick checklist
It uses a rear screw stopper that shortens the effective stroke. For this model, you can trim the 25mm nominal stroke back by up to 10mm, giving a usable travel window of 15-25mm.
At 0.7 MPa, the push force increases to 1374N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.