
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X250-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 250mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X250-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. Because this specific SKU carries a 100mm adjustment code, you can dial the effective travel back from its 250mm nominal stroke down to 150mm, creating a highly versatile 150-250mm usable window for product changeovers.
This unit includes a magnet (-S) for position sensing, functioning seamlessly with AirTAC CMSE reed and DMSE electronic switches housed in the dual-side sensor grooves. The rear stopper acts purely as a travel end-tuning device and does not lock the load without live air pressure. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X250-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the retract distance for different package lengths on a packaging line using the 150-250mm travel window without changing hardware.
Fine-tune the exact end-of-stroke position during machine commissioning to perfect alignment and avoid mechanical hard stops.
Adjust the pusher depth on a sorting conveyor to handle varying product widths dynamically on the fly.
The 100mm adjustment range is ideal for machines running multiple product sizes, allowing you to fine-tune the retract end-position at commissioning without swapping cylinders or adding external stops. For load-holding without continuous air pressure, integrate an external SAIL lock, BSAI clamp-lock, or pilot-operated check valve, as the SAIJ adjuster is not a brake.
When replacing an ISO 15552 cylinder, match the 50mm bore, 250mm nominal stroke, 100mm adjustment requirement, G1/4 PT ports, and the -S magnet. Since the 250mm stroke exceeds 300mm only marginally but still involves extended travel, ensure external guidance is used to prevent excessive side-loading on the 20mm rod. Operating speed ranges from 30-800 mm/s.
Quick checklist
At 0.7 MPa, the push force increases to 1374N.
The rear adjuster allows you to shorten the 250mm nominal stroke by up to 100mm, providing an effective travel window of 150-250mm. It functions as a mechanical stop to set the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.