
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X250-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 250mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X250-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 250 mm nominal stroke that can be fine-tuned down by up to 10 mm, yielding a precise 240-250 mm usable travel window during commissioning.
This variant includes a magnet for position sensing and is compatible with AirTAC CMSE reed and DMSE electronic switches mounted into the dual-side sensor grooves on the extruded aluminum barrel. The carbon steel piston rod features an M16x1.5 thread, and fluid supply is routed through PT (tapered) G1/4 ports.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X250-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 240-250 mm travel window on packaging lines to accommodate slight product length variations without machining new hard stops.
Use the 10 mm rear adjuster to micro-tune the retract stroke during machine setup, ensuring precise seating without replacing the entire actuator.
Select this adjustable-stroke model when your fixture requires exact end-position tuning without adding external stops or swapping cylinders during product changeovers. If your application demands less force, stepping down to a 40 mm bore yields 628 N at 0.5 MPa; stepping up to a 63 mm bore provides 1559 N. Because the nominal stroke is 250 mm, ensure adequate external guidance to prevent excessive side-loading on the M16x1.5 rod.
To match this ISO 15552 interchangeable cylinder, specify the 50 mm bore, 250 mm stroke, 10 mm adjustment range, PT G1/4 port, and the -S magnet option. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for fail-safe load holding, consider an AirTAC SAIL or BSAI cylinder. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective travel from the 250 mm nominal stroke down to 240 mm. It only sets the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.