
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X250-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 250mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X250-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows you to dial in the retract end position during commissioning without adding external stops.
Fitted with a PT tapered port (G1/4) and a 20mm carbon steel rod with an M16x1.5 thread, this unit handles robust side loads while maintaining standard ISO 15552 mounting dimensions. The -S designation means it includes a magnet for position sensing, working seamlessly with AirTAC CMSE reed and DMSE electronic switches mounted in the dual-side sensor grooves.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X250-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the 220-250mm travel window to accommodate different package lengths on a packaging line without swapping hardware.
Fine-tune the retract position during machine setup to achieve exact mechanical alignment without adding external stopper blocks.
Actuate a routing gate at varying distances to sort items precisely along a material handling conveyor.
An adjustable stroke is selected over a fixed SAI cylinder when a machine requires variable end-stops or frequent product changeovers, allowing you to trim the travel back by up to 30mm on the fly. For load-holding without live air pressure, note that this rear adjuster acts only as a travel stop and not a lock; you would need an external rod lock or a related SAIL pneumatic lock cylinder for those tasks.
To match this exact ISO 15552 replacement, confirm a 50mm bore, 250mm stroke, 30mm adjustment range, PT port thread, and the -S magnet option. Since the 250mm stroke is moderately long, ensure external guiding is used if the load imposes significant lateral leverage on the M16x1.5 rod. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR.
Quick checklist
It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the effective stroke by up to 30mm. This provides a usable travel window of 220-250mm, which can be fine-tuned during commissioning without changing the cylinder.
At 0.7 MPa, the push force increases to 1374N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.