verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X260-50

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X260-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 260mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke260 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$110.02 $117.52Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X260-50

The AirTAC SAIJ50X260-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 210-260 mm usable travel window, letting you dial back the nominal 260 mm stroke by up to 50 mm during commissioning.

The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches. This SKU uses a carbon steel rod with an M16x1.5 thread, and the rear stopper sets the travel end without holding the load without live air.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X260-50 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X260-50
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke260 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X260-50

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×260Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X260-50 Is Used

tune

Machine Changeover

Fine-tune the 210-260 mm travel window during product size changes on a packaging line without replacing the cylinder.

settings_input_component

Variable End-Stop Setup

Dial in the exact retract position during commissioning using the 50 mm rear adjustment screw rather than machining external stops.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X260-50 the Right Cylinder?

The adjustable stroke is ideal for product changeovers, allowing variable end-stops without adding external stops or swapping a fixed-stroke SAI cylinder. For strokes of 260 mm or more, the M16x1.5 rod still needs an external guide to handle side loads. This model uses a PT tapered port thread and the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. The rear adjuster acts as a travel stop, not a lock; for load-holding without live air, select an SAIL or BSAI cylinder.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X260-50 FAQ

The rear adjuster screw lets you shorten the 260 mm nominal stroke by up to 50 mm, providing a usable travel window of 210-260 mm. It acts as a mechanical stop to set the end position and does not lock the load without live air pressure.

At 0.7 MPa the push force increases to 1374 N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X260-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X260-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.