verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X275-10

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X275-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 275mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke275 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$110.02 $117.52Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X275-10

By turning the external stopper screw at the rear, you can trim the effective travel back by up to 10 mm, creating a precise 265-275 mm usable stroke window without swapping the barrel. It features a 16 mm carbon steel piston rod and a G1/4 port.

This adjustable design allows for fine end-position tuning during commissioning or product changeovers, eliminating the need to bolt on external stops. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is added later. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X275-10 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X275-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke275 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X275-10

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×275Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X275-10 Is Used

tune

Machine Setup & Changeover

Dial in the exact end-of-stroke position during initial commissioning or when adapting the line to a new product size, saving time over fixed-stop setups.

precision_manufacturing

Variable End-Stop Positioning

Trim the travel window by up to 10 mm to accommodate minor variations in part dimensions without re-engineering the pneumatic circuit.

conveyor_belt

Material Handling

Adjust the retract position on the fly to fine-tune pusher alignment on packaging or sorting conveyors.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X275-10 the Right Cylinder?

Choose this 50 mm bore when you need more thrust than the 40 mm variant provides (528N pull at 0.5 MPa) but want a smaller footprint than the 63 mm option. The adjustable stroke is perfect for applications requiring variable end-stops or setup flexibility, unlike a fixed-stroke SAI cylinder. Because the nominal stroke is 275 mm, ensure external guiding to prevent rod side-loading on long unsupported travels. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding, consider the SAIL or BSAI series. To match this ISO 15552 cylinder, specify the 50 mm bore, 275 mm stroke, 10 mm adjustment, PT port thread, and no magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X275-10 FAQ

The rear adjuster acts as a mechanical stop that lets you shorten the 275 mm nominal stroke by up to 10 mm, giving a usable travel window of 265-275 mm for fine-tuning the end position.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X275-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X275-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.