verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X280-10

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X280-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 280mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke280 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$110.02 $117.52Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X280-10

It features a carbon steel piston rod and tapered PT port threads. By integrating an external adjusting screw, this model allows you to fine-tune the retract end position during commissioning without adding external stops.

With a 10mm adjustment range, the effective travel window spans 270-280mm. This profile cylinder incorporates variable air cushions at both ends to decelerate the load smoothly. The rear screw acts purely as a travel stop and does not function as a lock, meaning it cannot hold a load without continuous live air pressure.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X280-10 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X280-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke280 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X280-10

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×280Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X280-10 Is Used

tune

End-Position Tuning

Dial in the exact retract distance within a 270-280mm window during machine commissioning to achieve precise positioning without swapping hardware.

settings_input_component

Product Changeover

Quickly adjust the stroke by up to 10mm on packaging lines when handling slightly different product sizes, minimizing downtime between runs.

conveyor_belt

Conveyor Diverter Setup

Fine-tune the diverter arm end stop on a conveyor system to accommodate varying package widths without installing additional physical stops.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X280-10 the Right Cylinder?

Conversely, heavier loads might necessitate the 63mm bore, which provides 1559N at 0.5MPa. The adjustable stroke is ideal for product changeovers on a line, offering flexibility that a fixed-stroke SAI cylinder cannot provide.

For a direct ISO 15552 replacement match, verify the 50mm bore, 280mm stroke, 10mm adjustment, PT port threads, and the specific mounting style. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets. Because the stroke is 280mm, ensure adequate external guidance to prevent excessive side-loading on the piston rod.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X280-10 FAQ

At the maximum pressure of 1.0MPa, it can deliver up to 200kgf.

The rear adjuster screw acts as a mechanical stop, allowing you to shorten the nominal 280mm stroke by up to 10mm, resulting in a usable travel window of 270-280mm. It is a travel stop and not a locking mechanism, so it will not hold the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X280-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X280-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.