
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X280-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 280mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X280-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. Because this specific SKU carries a -100 adjustment code, its 280mm nominal stroke can be dialed back by up to 100mm, providing a wide usable travel window of 180-280mm for highly flexible positioning.
This unit includes a -S magnet for use with AirTAC CMSE reed and DMSE electronic sensors, which mount cleanly into the dual-side sensor grooves on the extruded aluminum barrel. The rear stopper mechanism allows you to fine-tune the retract end position at commissioning or during product changeovers without physically swapping the cylinder or adding external stops. Note that this adjuster acts purely as a travel stop and does not lock the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X280-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Rapidly adapt the retract stroke from 280mm down to 180mm when switching the production line to a different product size, eliminating the need to physically swap cylinders.
Dial in the exact end-of-stroke stop during initial commissioning to perfect a pressing or lifting operation without machining custom external spacers.
Adjust the actuation depth on a conveyor sorting arm on the fly, allowing operators to accommodate varying package profiles using the rear adjustment screw.
The 100mm adjustment range is particularly valuable on long-form machinery where you need to dial in the exact retract distance during setup. If you need to hold the load securely in place without continuous compressed air, this standard SAIJ adjuster will not suffice; you should instead look at the SAIL series with an air-released lock or the BSAI clamp-lock variant.
When replacing an ISO 15552 cylinder, match the 50mm bore, 280mm stroke, PT G1/4 port thread, and the -S magnet requirement. Since the stroke here is 280mm, the M16x1.5 rod and standard air cushions will handle the travel, but you should verify that your mounting arrangement—using the SAIJ-compatible Basic, FA, LB, TC, FTC, TCM1, or TCM2 brackets—supports the load adequately to prevent excessive side-loading on the rod.
Quick checklist
If you increase the pressure to 0.7 MPa, the push force rises to 1374N.
The rear adjuster screw lets you shorten the 280mm nominal stroke by up to 100mm, creating a usable travel window of 180-280mm. It functions as a mechanical stop to fine-tune the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.