
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X280-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 280mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X280-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 280 mm stroke with a 30 mm adjustment range, yielding a usable travel window of 250 to 280 mm. This allows you to fine-tune the retract end position at commissioning without swapping hardware.
The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. It uses a standard carbon steel piston rod with an M16x1.5 thread, providing robust resistance to side loading. The rear adjuster acts purely as a travel stop for deceleration and does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X280-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 250-280 mm travel window during product size transitions on a packaging line without replacing the cylinder.
Set precise retract positions for multi-format fixtures, using the rear stopper to trim the 280 mm stroke by up to 30 mm.
Fine-tune the actuation endpoint on sorting gates to accommodate varying package lengths on the fly.
If your process needs less force, stepping down to a 40 mm bore yields 628 N; for heavier loads, a 63 mm bore provides 1559 N. The adjustable stroke is ideal for machine setups requiring variable end-stops during product changeovers, replacing the need for a fixed-stroke SAI cylinder.
Because the stroke is 280 mm, an external guide is recommended to prevent rod binding over this travel distance. For dimensionally interchangeable ISO 15552 replacements, match the 50 mm bore, 280 mm stroke, 30 mm adjustment, PT G1/4 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that SAIJ omits the FB, CA, CB, and CR mounts. For load-holding without live air, select the SAIL or BSAI series instead.
Quick checklist
The rear adjuster screw lets you shorten the effective travel from the nominal 280 mm down to 250 mm. This stopper only sets the end position for deceleration and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.