
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X280-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 280mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X280-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a carbon steel rod and PT tapered ports. Because this specific SKU carries a -30 adjustment code and a 280 mm nominal stroke, you can fine-tune the usable travel window down to 250 mm during commissioning without adding external stops.
The extruded aluminum barrel includes sensor grooves on both sides, and the -S magnet enables position feedback via AirTAC CMSE reed and DMSE electronic solid-state switches. The rear adjuster acts purely as a mechanical stop to set the retract end-position; it does not lock or hold the load without continuous air pressure. For applications requiring true load-holding without live air, consider the related SAIL pneumatic lock or BSAI clamp-lock series.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X280-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 250-280 mm travel window during product size transitions on a packaging line without replacing the cylinder.
Apply adjustable pressing force up to 1767 N at 0.9 MPa while using the rear screw to set precise bottoming depth.
The adjustable stroke is ideal for machine setups requiring variable end-stops or product-size changeovers, offering a 250-280 mm travel window. The rear screw allows precise end-position tuning without swapping the cylinder, unlike a fixed-stroke SAI model.
Because the 280 mm stroke exceeds 300 mm? No, at 280 mm it is just under the threshold, but for any longer unsupported travel, an external guide is recommended to manage side loads. To ensure exact ISO 15552 replacement compatibility, verify the 50 mm bore, 280 mm stroke, -30 mm adjustment, PT port threads, and the -S magnet requirement. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR.
Quick checklist
The -30 code means the nominal 280 mm stroke can be mechanically shortened by up to 30 mm via a rear screw, giving an effective travel window of 250-280 mm. The adjuster acts as a stop to set the end position and does not lock the load without live air pressure.
The operating speed range is 30-800 mm/s, and the -S magnet works with AirTAC CMSE reed and DMSE electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.