
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X280-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 280mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X280-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It delivers a nominal 280 mm stroke that can be dialed back by up to 40 mm, providing a usable travel window of 240 to 280 mm for precise end-position tuning during commissioning.
This variant features a standard carbon steel piston rod and a built-in magnet (-S) for position sensing with AirTAC CMSE reed or DMSE electronic solid-state switches. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting. Its PT tapered port threads (G1/4) ensure a tight, reliable pneumatic connection without requiring sealant on the mating faces.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X280-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial the stroke back by up to 40 mm to accommodate new package sizes on a packaging line without disassembling the cylinder mount.
Use the 240-280 mm travel window to precisely set the retract end-position during initial commissioning, avoiding the need for spacer shims.
Adjust the retract distance on the fly to push different product lengths onto a diverter without changing the fixed hardware setup.
The 40 mm adjustment range is ideal for product changeovers, allowing you to shift the end-stop without physically swapping the cylinder or adding external mechanical stops. For strokes of 280 mm or more, the M16x1.5 rod handles standard loads, but an external guide rail is recommended to prevent side-load wear on the rod seals.
This SAIJ model is dimensionally interchangeable per ISO 15552 and uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets. Remember that the rear adjuster acts only as a travel stop; it does not hold the load without live air pressure. For true fail-safe load holding, consider the SAIL (air-released lock) or BSAI (clamp-lock) series instead.
Quick checklist
It features an external adjusting screw at the rear that acts as a stopper, allowing you to shorten the effective stroke by up to 40 mm. This creates a usable travel window of 240 to 280 mm. The adjuster only sets the travel end; it does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.