
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X280-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 280mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X280-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 280 mm stroke that can be dialed back by up to 50 mm, yielding a usable travel window of 230-280 mm for precise end-position tuning at commissioning.
This adjustable-stroke design eliminates the need to swap cylinders or add external stops during product changeovers. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches, though this specific SKU is configured without a magnet. The rear adjuster acts strictly as a travel stop to set the retraction end-point and relies on the integrated air cushions for deceleration.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X280-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 230-280 mm travel window during packaging line format changes to accommodate different carton sizes without swapping hardware.
Fine-tune the final retract position during machine commissioning to achieve exact alignment without adding external mechanical stops.
Adjust the rear stopper on the fly for automated assembly stations that process multiple part lengths within the same work cell.
The 50 mm adjustment range is ideal for machinery needing frequent product-size changeovers, allowing operators to fine-tune the 230-280 mm travel window without mechanical modifications. For fixed end-positions, a standard SAI cylinder is sufficient, but the SAIJ variant provides superior setup flexibility.
Because the stroke is 280 mm, ensure adequate external guidance to prevent excessive side-loading on the 20 mm carbon steel rod. This model uses PT tapered ports and supports the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that the rear adjuster and air cushions do not hold the load without live air; for fail-safe load holding, consider an AirTAC SAIL or BSAI cylinder.
Quick checklist
The maximum thrust is 200 kgf at 1.0 MPa.
The rear adjuster acts as a mechanical stop that shortens the effective stroke. For this 280 mm nominal stroke cylinder, you can trim the travel back by up to 50 mm, creating a usable 230-280 mm positioning window without changing the cylinder itself.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.