
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X280-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 280mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X280-75 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 280 mm travel by up to 75 mm for a usable window of 205-280 mm. This fine-tuning capability is ideal for product-size changeovers without swapping hardware.
The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. It uses a PT tapered port thread and operates at speeds between 30 and 800 mm/s. The rear screw acts purely as a travel stop to set the end position, so it does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X280-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 205-280 mm travel window on the fly to accommodate different package sizes on a packaging line without changing the cylinder.
Fine-tune the retract end-position during commissioning to achieve precise alignment, avoiding the need for external mechanical stops.
Adjust the stroke dynamically for diverter gates on a conveyor system where the actuation distance varies by product type.
The 75 mm adjustment range is perfect for variable end-stop positioning during machine setup, replacing the need for fixed-stroke SAI cylinders when exact end positions might shift. Because the nominal stroke is 280 mm, an external guide is recommended to handle side loads on the extended rod.
To match this ISO 15552 footprint for a direct replacement, confirm the 50 mm bore, 280 mm stroke, 75 mm adjustment, PT port thread, and standard carbon steel rod without a magnet. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. For applications requiring true load-holding without continuous air pressure, consider the SAIL or BSAI locking cylinder variants instead of relying on the rear stopper.
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjuster screw lets you trim the effective travel back by up to 75 mm from the 280 mm nominal stroke, creating a usable 205-280 mm window. It functions as a mechanical stop and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.