
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X280-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 280mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X280-75-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. By turning the external adjustment screw, you can trim the nominal 280mm travel back by up to 75mm, creating a precise 205-280mm usable stroke window without adding external stops. The extruded aluminum barrel includes sensor grooves on both sides, and this -S variant contains a magnet for position detection.
Equipped with a carbon steel rod and an M16x1.5 thread, this 50mm bore unit handles robust side loads while offering PT (tapered) G1/4 ports. The rear adjuster acts strictly as a travel stop to fine-tune the end position during commissioning or product changeovers. It does not lock the load without live air pressure; for dead-stop holding, consider an external rod lock or the related SAIL series.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X280-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-position during product size changeovers on a packaging line by adjusting the rear screw, shifting the travel window anywhere between 205mm and 280mm.
Adjust the retract stroke on the fly to accommodate different package lengths on a conveyor diverter without physically replacing the actuator.
Fine-tune the final end-stop during machine commissioning to avoid mechanical hard crashes, using the built-in rear stopper rather than external shims.
Choose this adjustable-stroke model when your machine setup requires variable end-stops or frequent product size changeovers, eliminating the need to physically swap out a fixed-stroke SAI cylinder. Conversely, heavier loads may require stepping up to a 63mm bore (1559N).
Because the 280mm stroke exceeds 300mm is approaching the threshold where rod deflection becomes a concern, ensure you use an external guide to prevent side-load damage to the rod seals. This cylinder uses the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). The -S magnet works seamlessly with AirTAC CMSE reed switches and DMSE electronic solid-state sensors. It is dimensionally interchangeable per ISO 15552.
Quick checklist
It operates at speeds between 30-800mm/s and features a 280mm nominal stroke that can be adjusted back by up to 75mm.
The rear adjuster acts as an external mechanical stop that shortens the effective stroke, giving you a usable travel window of 205-280mm. It only sets the end position and decelerates the travel; it does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.