
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X290-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 290mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X290-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 290 mm stroke that can be fine-tuned down by up to 100 mm, yielding a usable travel window of 190 to 290 mm. This allows exact end-position calibration during commissioning without swapping hardware.
Because the adjuster acts purely as a mechanical stop and does not lock the load, live air pressure is required to maintain position. For load-holding without air, consider the SAIL or BSAI variants. This extruded aluminum profile cylinder supports standard SAIJ mountings (Basic, FA, LB, TC, FTC, TCM1, TCM2) and includes sensor grooves on both sides for CMSE or DMSE switches if a magnet is added later.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X290-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 190-290 mm travel window during format size changes on a packaging line without swapping out the entire actuator.
Fine-tune the retract position during machine commissioning using the rear screw, avoiding the need to bolt on external mechanical stops.
Adjust the pusher stroke on the fly to accommodate different carton lengths moving down a conveyor system.
If less force is needed, a 40 mm bore provides 628 N; if more is required, stepping up to a 63 mm bore yields 1559 N. The 100 mm adjustment range is ideal for product-size changeovers on a line, replacing the need for fixed SAI cylinders or external stops. To replace an ISO 15552 cylinder, match the 50 mm bore, 290 mm stroke, 100 mm adjust, G1/4 PT port, and mounting set.
With a 290 mm stroke, the 20 mm carbon steel rod offers good rigidity, but an external guide should be used to prevent excessive side-loading on long extensions. The cylinder operates at speeds of 30-800 mm/s and uses variable air cushions at both ends to decelerate the load smoothly.
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from the 290 mm nominal stroke down to as little as 190 mm. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.