
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X290-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 290mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X290-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 270-290 mm usable travel window, allowing you to dial back the 290 mm nominal stroke by up to 20 mm during commissioning.
This model uses a carbon steel piston rod with an M16x1.5 thread, offering solid durability for typical loads. Because the stroke extends to 290 mm, an external guide is recommended to prevent excessive side-load wear on the seals. The extruded aluminum barrel includes sensor grooves on both sides for easy mounting of CMSE or DMSE switches.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X290-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 270-290 mm travel window during product size transitions without physically swapping the cylinder or altering external hard stops.
Dial in the exact retract distance at commissioning using the rear screw, perfect for aligning packaging folds or press strokes precisely.
The adjustable stroke is ideal for machine changeovers, letting you fine-tune the end position without swapping cylinders or adding external stops. Remember, the rear adjuster is a travel stop, not a lock; it cannot hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series.
To match this ISO 15552 replacement cylinder exactly, specify the 50 mm bore, 290 mm stroke, 20 mm adjustment range, PT tapered port thread, and standard carbon rod material. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
A rear adjusting screw acts as a mechanical stopper, allowing you to shorten the effective stroke by up to 20 mm. This creates a 270-290 mm usable travel window for fine-tuning the end position at commissioning without replacing the cylinder.
It can deliver up to 200 kgf at its maximum 1.0 MPa pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.