
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X290-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 290mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X290-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down by 40 mm, creating a usable window from 250 to 290 mm. The extruded aluminum barrel includes sensor grooves on both sides for straightforward positioning feedback.
This model uses a 20 mm carbon steel rod with an M16x1.5 thread, offering solid resistance to bending under moderate side loads. Because the stroke is 290 mm, maintaining an external guide is recommended to prevent rod deflection over longer travels. The PT tapered port is G1/4, and the cylinder supports variable air cushions at both ends to soften end-of-stroke impacts.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X290-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly recalibrate the cylinder's end-stop from 290 mm down to 250 mm when adapting a packaging line to a new carton size.
Fine-tune the final retract position during commissioning without machining new spacer plates or altering the machine frame.
Dial in the exact clamping depth on a fixture where part tolerances vary slightly, using the 40 mm adjustment screw.
The 40 mm adjustment range is perfect for machine setups requiring variable end-stops or product changeovers, allowing you to dial in the exact 250-290 mm travel without physically swapping the cylinder or adding bulky external stopper blocks.
When replacing an ISO 15552 cylinder, match the 50 mm bore, 290 mm stroke, 40 mm adjustment requirement, G1/4 PT port, and your preferred mounting option from the SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2. Note that this cylinder does not hold loads without live air pressure; the rear adjuster is strictly a travel stop, not a locking device. For dead-load holding, consider the SAIL or BSAI series instead.
Quick checklist
At the maximum pressure of 1.0 MPa, it can deliver up to 200 kgf.
A rear external stopper screw lets you mechanically shorten the stroke by up to 40 mm. This creates a usable travel window of 250 to 290 mm, allowing precise end-position tuning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.