
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X30-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 30mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X30-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 20-30mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches.
Unlike a fixed-stroke SAI unit, this model allows you to dial back the extend position by up to 10mm during commissioning without adding external stops. The PT tapered port thread ensures a tight pneumatic connection, while the carbon steel rod handles standard operational loads. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X30-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the extend position by up to 10mm during machine commissioning to achieve exact product contact without machining external spacers.
Quickly adjust the 20-30mm travel window on packaging lines when switching to different product sizes, reducing setup downtime.
The adjustable stroke is ideal for machine setups requiring variable end-stops or product-size changeovers. Since the stroke is 30mm, side-load risks are minimal, but always guide external loads for smooth operation.
For ISO 15552 replacement matching, verify the 50mm bore, 30mm nominal stroke, 10mm adjustment range, PT port thread, and carbon steel rod. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. If your application requires true load-holding without live air, consider the SAIL or BSAI series instead.
Quick checklist
If you increase the pressure to 0.7 MPa, the push force rises to 1374N.
The rear adjuster screw allows you to shorten the effective travel from the 30mm nominal stroke down to 20mm. This creates a 20-30mm adjustable window for fine-tuning the end position at commissioning without swapping the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.