
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X30-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 30mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel rod and a PT tapered port thread. Because the nominal 30mm stroke can be dialed back by up to 10mm, you gain a 20-30mm usable travel window for exact end-position tuning without adding external stops. The -S magnet enables position feedback with AirTAC CMSE reed and DMSE solid-state sensors.
This adjustable stopper acts purely as a mechanical travel stop and does not hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL pneumatic lock or BSAI clamp-lock series. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting set spans Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X30-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-position within the 20-30mm travel window during machine commissioning without replacing the cylinder or adding external stopper blocks.
Quickly adapt the stroke end-stop for varying product sizes on a conveyor line, utilizing the 10mm adjustment range to handle different package dimensions.
Leverage the built-in magnet with CMSE or DMSE sensors to confirm end-of-travel positions while fine-tuning the stroke for precise clamping or ejecting tasks.
The 10mm adjustment range is ideal for short-stroke setups requiring fine commissioning tweaks or product changeovers, avoiding the need to swap a fixed-stroke SAI cylinder. To match this ISO 15552 replacement exactly, specify the 50mm bore, 30mm stroke, 10mm adjustment, PT port thread, and the -S magnet option.
Since the rod diameter is 20mm with an M16x1.5 thread, it handles moderate side loads well, though any application approaching the maximum 30-800mm/s speed range should still use an external guide. Remember that the rear adjuster and air cushions only decelerate the travel end; they do not function as a brake or lock.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 200 kgf.
The rear adjusting screw allows you to shorten the effective stroke by up to 10mm from the 30mm nominal length, creating a 20-30mm usable travel window. This stopper fine-tunes the end position at commissioning but does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.