
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X30-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 30mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
By integrating an external adjusting screw at the rear, this 50mm bore model allows you to fine-tune the end position without swapping components or adding external stops. It features a carbon steel piston rod and PT tapered port threads.
With a nominal stroke of 30mm and a 20mm adjustment code, this cylinder provides a usable travel window of 10-30mm. This built-in adjustability is ideal for short-stroke applications requiring precise end-position tuning during commissioning or product changeovers. The extruded aluminum profile includes sensor grooves on both sides, and while this unit lacks a magnet, adding an -S variant enables compatibility with CMSE reed and DMSE electronic sensors.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X30-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 10-30mm travel window during format changes on packaging lines, accommodating varying product sizes without mechanical rebuilds.
Apply 982N of precise clamping force at 0.5 MPa, using the rear stopper to set the exact final position for delicate machining tasks.
Fine-tune the retract end-position during initial machine setup, preventing hard mechanical crashes by trimming the stroke up to 20mm.
An adjustable stroke is highly beneficial when you need variable end-stops for product size changes on a line, whereas a fixed SAI cylinder suits static stop requirements. For this SAIJ50X30-20, ensure your setup specifies a 50mm bore, 30mm nominal stroke, 20mm adjustment, PT port threads, and no magnet.
Because the stroke is under 300mm, external side-load guides are less critical than on longer strokes, though the 20mm carbon steel rod handles standard loads well. Remember that the rear adjuster acts only as a travel stop to set deceleration, not as a lock; the cylinder will not hold a load without live air. For load-holding requirements without pneumatic pressure, consider an AirTAC SAIL or BSAI cylinder. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At 0.7 MPa, the push force increases to 1374N.
The rear adjusting screw acts as a mechanical stop, allowing you to trim the effective travel back by up to 20mm. This creates a usable stroke window of 10-30mm, enabling precise end-position tuning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.