
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X35-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 35mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X35-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 35 mm stroke that can be fine-tuned down by up to 10 mm, giving operators a precise 25-35 mm usable travel window during commissioning.
This variant features a carbon steel piston rod and PT tapered port threads (G1/4). The integrated -S magnet enables position detection with AirTAC CMSE reed or DMSE electronic solid-state sensors housed in the dual-side extruded barrel grooves. The rear screw acts purely as a travel stop for deceleration and does not lock the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X35-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 25-35 mm travel window during machine commissioning to seat delicate components perfectly without ordering custom stroke lengths.
Quickly adjust the rear stopper by up to 10 mm to accommodate slight variations in product dimensions on a packaging line.
Fine-tune the ejection end-point on an assembly fixture to account for tooling wear, using the -S magnet to confirm the adjusted position.
If your setup needs less force, stepping down to a 40 mm bore yields 628 N; if you need more clamping power, a 63 mm bore provides 1559 N. The adjustable rear stopper allows you to dial in the exact 25-35 mm stroke on the fly, which is far more efficient than machining external stops or ordering a custom fixed-stroke SAI cylinder.
Because the stroke is only 35 mm, side-load risks are minimal, but always ensure the load is guided to prevent binding. Remember that the adjuster is a stop, not a lock; for load-holding without live air pressure, consider an AirTAC SAIL or BSAI model. This SAIJ50X35-10-S is dimensionally interchangeable per ISO 15552 and supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR).
Quick checklist
The rear adjuster screw allows you to shorten the 35 mm nominal stroke by up to 10 mm, creating a usable travel window of 25 to 35 mm. This stopper only sets the end position and does not hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.